Within 200 miles of London
Bespoke kitchens and kitchen fitters in Sheffield
Complete kitchen refurbishments for homes in Ranmoor, Fulwood, Dore, Totley, Ecclesall and Nether Edge, from the first measure to the last appliance test.
Call 07353 373753Book a survey
- One team for every trade
- Written estimate before work starts
- Gas engineers and qualified electricians
Starting prices
Kitchen renovation prices: what the starting package includes
Supplied and fitted from £6,000
A small kitchen on the same layout: 6 to 8 budget units, laminate worktop, stainless sink and tap, built-in single oven, hob and extractor, vinyl flooring, strip-out and disposal of the old kitchen, plumbing and electrical connections, fitting and clean-up.
Fitting only from £2,000
You buy the kitchen, we fit it: 6 to 8 units, worktop, sink and tap, connecting up to 3 appliances, on the same layout.
What costs extra
Moving the sink, hob or oven, new circuits, stone or solid-wood worktops, tiling beyond splashbacks, plastering and premium units or appliances. Each one is itemised in your written quote. All starting prices include VAT.
South Yorkshire
Kitchen fitters in Sheffield
Plumbery is a London company. We travel to Sheffield, about 145 miles away, for complete projects rather than small repairs, and keep one project lead as your contact throughout.
In Nether Edge and Ecclesall many houses step down a slope, with the kitchen in a lower ground floor. Opening that level onto the garden is a popular project, and it needs careful damp-proofing and drainage as well as the kitchen itself.
Cost and time
Budget and timescale
A refit in the same layout typically takes one to two weeks on site and a full renovation two to four. Use the kitchen renovation cost calculator for an estimate with VAT, or see the full scope on our London kitchen refurbishment page.
Local know-how
Before you start in Sheffield
Sheffield has soft water, so appliances and taps scale up far less than in the South East. We still check pressure and flow at the sink before fitting a boiling-water tap or a mixer.
Gas hobs are connected by our gas engineers and new cooker circuits are notifiable under Part P. Structural openings go to Sheffield City Council building control or an approved inspector.
What we do
Typical briefs we get from Sheffield
Kitchen-diner opening
Taking down a wall between kitchen and dining room, with a steel beam and building control sign-off.
Utility and boot room
A second sink, washer and dryer, with separate drainage and ventilation.
Integrated appliances
Ovens, warming drawers, wine coolers and full-height fridges, each with the supply it needs.
Boiling-water and filter taps
Plumbed with the right filter and, in hard water areas, scale protection.
Our clients
Kitchen projects across Ranmoor, Fulwood, Dore, Totley, Ecclesall and Nether Edge
We focus on homeowners in Ranmoor, Fulwood, Dore, Totley, Ecclesall and Nether Edge who want the job done properly once: considered layout, quality materials and trades that turn up in the right order.
Sheffield has a strong tradition of local joinery and steel, and many of our kitchen clients want solid timber cabinetry and stone worktops. We fit made-to-measure units and template stone worktops once the carcasses are in.
Questions
Kitchen refurbishment in Sheffield: your questions
Can you fit a bespoke solid-wood kitchen in Sheffield?
Yes. We fit made-to-measure and solid-timber kitchens, coordinate the plumbing, gas and electrics around them and template stone worktops after the units are in.
Do you work in Sheffield?
Yes. We take on complete kitchen refurbishment projects across Sheffield, including Crookes, Walkley, Nether Edge, Ecclesall, Hillsborough and Dore, and in Ranmoor, Fulwood, Dore, Totley, Ecclesall and Nether Edge.
Can you put a hob or sink in an island?
Usually yes. The waste needs enough fall, the hob needs its circuit and extraction, and we plan both before the floor goes down.
Do you connect gas hobs and range cookers?
Yes, our gas engineers connect and test them.
How long does a kitchen refurbishment take?
A refit typically takes one to two weeks on site and a full renovation two to four, with a week or two between templating and fitting stone worktops.
Why Plumbery
Qualified, insured and upfront about price
Every engineer we send is registered or qualified for the trade they work in, and you can check the details before anyone starts.
- Fully insuredEvery job is covered by our insurance.
- Rates published in advanceOur hourly rates are on the pricing page. Nothing starts until you agree the rate.
- Paperwork includedGas safety certificates and electrical records are provided on completion.
- Registered companyPlumbery Ltd, company no. 11677583, registered in England and Wales.
